Cartopy projection list

PlateCarree

class cartopy.crs.PlateCarree(central_longitude=0.0, globe=None)

(Source code)

(Source code)

AlbersEqualArea

class cartopy.crs.AlbersEqualArea(central_longitude=0.0, central_latitude=0.0, false_easting=0.0, false_northing=0.0, standard_parallels=(20.0, 50.0), globe=None)

An Albers Equal Area projection

This projection is conic and equal-area, and is commonly used for maps of the conterminous United States.

Kwargs:

• central_longitude - The central longitude. Defaults to 0.

• central_latitude - The central latitude. Defaults to 0.

• false_easting - X offset from planar origin in metres.

  Defaults to 0.

• false_northing - Y offset from planar origin in metres.

  Defaults to 0.

• standard_parallels - The one or two latitudes of correct scale.

  Defaults to (20, 50).

• globe - A cartopy.crs.Globe.

  If omitted, a default globe is created.

(Source code)

AzimuthalEquidistant

class cartopy.crs.AzimuthalEquidistant(central_longitude=0.0, central_latitude=0.0, false_easting=0.0, false_northing=0.0, globe=None)

An Azimuthal Equidistant projection

This projection provides accurate angles about and distances through the central position. Other angles, distances, or areas may be distorted.

Kwargs:

• central_longitude - The true longitude of the central meridian in

  degrees. Defaults to 0.

• central_latitude - The true latitude of the planar origin in

  degrees. Defaults to 0.

• false_easting - X offset from the planar origin in metres.

  Defaults to 0.

• false_northing - Y offset from the planar origin in metres.

  Defaults to 0.

• globe - An instance of cartopy.crs.Globe. If omitted, a

  default globe is created.

(Source code)

LambertConformal

class cartopy.crs.LambertConformal(central_longitude=-96.0, central_latitude=39.0, false_easting=0.0, false_northing=0.0, secant_latitudes=None, standard_parallels=None, globe=None, cutoff=-30)

A Lambert Conformal conic projection.

Kwargs:

• central_longitude - The central longitude. Defaults to -96.

• central_latitude - The central latitude. Defaults to 39.

• false_easting - X offset from planar origin in metres.

  Defaults to 0.

• false_northing - Y offset from planar origin in metres.

  Defaults to 0.

• standard_parallels - Standard parallel latitude(s).

  Defaults to (33, 45).

• globe - A cartopy.crs.Globe.

  If omitted, a default globe is created.

• cutoff - Latitude of map cutoff.

  The map extends to infinity opposite the central pole so we must cut off the map drawing before then. A value of 0 will draw half the globe. Defaults to -30.

(Source code)

LambertCylindrical

class cartopy.crs.LambertCylindrical(central_longitude=0.0)

(Source code)

Mercator

class cartopy.crs.Mercator(central_longitude=0.0, min_latitude=-80.0, max_latitude=84.0, globe=None)

A Mercator projection.

Kwargs:

• central_longitude - the central longitude. Defaults to 0.

• min_latitude - the maximum southerly extent of the projection.

  Defaults to -80 degrees.

• max_latitude - the maximum northerly extent of the projection.

  Defaults to 84 degrees.

• globe - A cartopy.crs.Globe.

  If omitted, a default globe is created.

(Source code)

Miller

class cartopy.crs.Miller(central_longitude=0.0)

(Source code)

Mollweide

class cartopy.crs.Mollweide(central_longitude=0, globe=None)

(Source code)

Orthographic

class cartopy.crs.Orthographic(central_longitude=0.0, central_latitude=0.0, globe=None)

(Source code)

Robinson

class cartopy.crs.Robinson(central_longitude=0, globe=None)

(Source code)

Sinusoidal

class cartopy.crs.Sinusoidal(central_longitude=0.0, false_easting=0.0, false_northing=0.0, globe=None)

A Sinusoidal projection.

This projection is equal-area.

Kwargs:

• central_longitude - The central longitude. Defaults to 0.

• false_easting - X offset from planar origin in metres.

  Defaults to 0.

• false_northing - Y offset from planar origin in metres.

  Defaults to 0.

• globe - A cartopy.crs.Globe.

  If omitted, a default globe is created.

(Source code)

Stereographic

class cartopy.crs.Stereographic(central_latitude=0.0, central_longitude=0.0, false_easting=0.0, false_northing=0.0, true_scale_latitude=None, globe=None)

(Source code)

TransverseMercator

class cartopy.crs.TransverseMercator(central_longitude=0.0, central_latitude=0.0, false_easting=0.0, false_northing=0.0, scale_factor=1.0, globe=None)

A Transverse Mercator projection.

Kwargs:

• central_longitude - The true longitude of the central meridian in

  degrees. Defaults to 0.

• central_latitude - The true latitude of the planar origin in

  degrees. Defaults to 0.

• false_easting - X offset from the planar origin in metres.

  Defaults to 0.

• false_northing - Y offset from the planar origin in metres.

  Defaults to 0.

• scale_factor - Scale factor at the central meridian. Defaults

  to 1.

• globe - An instance of cartopy.crs.Globe. If omitted, a

  default globe is created.

(Source code)

UTM

class cartopy.crs.UTM(zone, southern_hemisphere=False, globe=None)

Universal Transverse Mercator projection.

Kwargs:

• zone - the numeric zone of the UTM required.

• globe - An instance of cartopy.crs.Globe. If omitted, a

  default globe is created.

• southern_hemisphere - set to True if the zone is in the southern

  hemisphere, defaults to False.

(Source code)

InterruptedGoodeHomolosine

class cartopy.crs.InterruptedGoodeHomolosine(central_longitude=0, globe=None)

(Source code)

RotatedPole

class cartopy.crs.RotatedPole(pole_longitude=0.0, pole_latitude=90.0, central_rotated_longitude=0.0, globe=None)

Defines a rotated latitude/longitude projected coordinate system with cylindrical topology and projected distance.

Coordinates are measured in projection metres.

Create a RotatedPole CRS.

The class uses proj4 to perform an ob_tran operation, using the pole_longitude to set a lon_0 then performing two rotations based on pole_latitude and central_rotated_longitude. This is equivalent to setting the new pole to a location defined by the pole_latitude and pole_longitude values in the GeogCRS defined by globe, then rotating this new CRS about it’s pole using the central_rotated_longitude value.

Args:

• pole_longitude - Pole longitude position, in unrotated degrees.

• pole_latitude - Pole latitude position, in unrotated degrees.

• central_rotated_longitude - Longitude rotation about the new

  pole, in degrees.

Kwargs:

• globe - An optional cartopy.crs.Globe.

  Defaults to a “WGS84” datum.

(Source code)

OSGB

class cartopy.crs.OSGB

(Source code)

EuroPP

class cartopy.crs.EuroPP

UTM Zone 32 projection for EuroPP domain.

Ellipsoid is International 1924, Datum is ED50.

(Source code)

Geostationary

class cartopy.crs.Geostationary(central_longitude=0.0, satellite_height=35785831, false_easting=0, false_northing=0, globe=None)

(Source code)

Gnomonic

class cartopy.crs.Gnomonic(central_latitude=0.0, globe=None)

(Source code)

LambertAzimuthalEqualArea

class cartopy.crs.LambertAzimuthalEqualArea(central_longitude=0.0, central_latitude=0.0, false_easting=0.0, false_northing=0.0, globe=None)

A Lambert Azimuthal Equal-Area projection.

Kwargs:

• central_longitude - The central longitude. Defaults to 0.

• central_latitude - The central latitude. Defaults to 0.

• false_easting - X offset from planar origin in metres.

  Defaults to 0.

• false_northing - Y offset from planar origin in metres.

  Defaults to 0.

• globe - A cartopy.crs.Globe.

  If omitted, a default globe is created.

(Source code)

NorthPolarStereo

class cartopy.crs.NorthPolarStereo(central_longitude=0.0, globe=None)

(Source code)

OSNI

class cartopy.crs.OSNI

(Source code)

SouthPolarStereo

class cartopy.crs.SouthPolarStereo(central_longitude=0.0, globe=None)

(Source code)